Shower Filters

Instantly upgrade your in-shower hair and skin care routine with a Delta® Clarifi™ Shower Filter. This filter has a unique design that reduces chlorine and sediment in your shower water.

Filter By

You've viewed 10 of 10 products

Frequently Asked Questions

How do I replace the shower filter cartridges?

Here are video instructions on how to install the shower filter replacement cartridge.

With the shower water turned off, remove the used cartridge by rotating the cap counterclockwise so that the shower filter cartridge separates from the filter housing unit. Pull the cap and the cartridge away from the unit together.
Separate the cap from the cartridge by rotating the cap counterclockwise on the cartridge and pull the cap away from the cartridge.
Remove the 2 storage stickers from the new filter and discard.
Align the cap’s two tabs to the slots on the back of the filter cartridge and press the cap and cartridge together. Rotate the filter cartridge clockwise onto the cap.
Insert the new cartridge and cap into the shower filter housing unit and rotate clockwise to reassemble.
Flush water for 1 minute to remove air from the system before use.

How often do the filter cartridges need to be changed?

The estimated shower filter life is approximately 6 months or 10,000 gallons of water, whichever comes first. Our calculations are based on a shower flow rate of 2.1 gallons per minute (GPM). The lifespan of the shower filter will change depending on the total number of daily uses, how many minutes per week the filter is used, and the flow rate of the shower head that you attach the filter to. The DFC@Home™ app can notify you when it’s time to change the filter cartridge.

How does the Clarifi™ Shower Filter work?

Water enters the shower filter through your current supply line while an inlet screen prevents large sediment from clogging the filter. Our proprietary process continuously treats the water as it passes through the filter, changing its composition to reduce impurities that may cause dry skin and hair. Your now filtered water will flow to your current shower head as usual.

How do I install the Clarifi™ Shower Filter Attachment?

Here are the video instructions on how to install the shower filter attachment.

Remove your existing shower head by rotating counterclockwise
Flush the shower arm with water and remove any residual sealant or plumber’s tape on the shower arm threads.
Unthread to remove the plastic storage cap from the mounting nut on the shower filter. Verify the filter gasket is in place in the mounting nut, and remove the storage sticker from the mounting threads.
Orient the shower filter to the final position below the shower arm. Hold the filter in place while tightening the mounting nut from the shower filter onto your existing shower arm - rotating it clockwise. Finish tightening the mounting nut with a soft-jawed or adjustable strap wrench, but do not overtighten.
Verify that the gasket is still in place in the shower head, then hand tighten the shower head onto the shower filter.
Flush water for 1 minute to remove air from the system before use.

Will the Clarifi™ Shower Filter Attachment work with any shower head?

The Clarifi™ Shower Filter Attachment is compatible with standard, wall-mounted shower heads or hand shower mounts. Combination showers may be used if their furthest length from the shower arm connection does not exceed 9 inches. The shower filter is not designed for use with overhead showers or 90° shower arms due to their size and weight.

Shower Filters

Clarifi™

VersaCurl™

Clarifi™

Clarifi™

Clarifi™

Clarifi™

DETANGLING SHOWER TOOL

Clarifi™

Clarifi™

Clarifi™

Clarifi™

Frequently Asked Questions